Interesting article on watching cedar cladding age.

Watching Cedar cladding age

Over the last few months, we have been watching our Cedar age. I know what you are thinking, but it’s more interesting than it sounds!

If you explore the gallery section of this site, you will quickly see that Cedar is the dominant material used for the exterior cladding of a garden room.

It is a popular choice because it has a rich appearance and natural durability which means it has a long lifespan without requiring extensive maintenance.

The thing is it will change colour

The thing is Cedar (and other durable softwoods like Siberian Larch) will change colour as it ages. We know buyers are drawn to the rich natural tone of Cedar. When freshly sawn it has a mellow reddish brown. Left unprotected it will weather to a silver grey as it is exposed to the sun. Still a lovely finish, but the cladding does look ‘old’ compared with newly fitted cladding.

New, unexposed Cedar cladding has reddish brown variations
New, unexposed Cedar cladding has reddish brown variations

Preserve the colour of Cedar

OSMO UV-oil slows down the weathering of Cedar

You can preserve the reddish brown colour of Cedar and significantly reduce the weathering process and as a result of the colour change, if you apply a UV-oil.

This needs to be done when the Cedar is new before it is exposed to light. The commonly used product used is OSMO UV-Oil. This is a clear finish that is reapplied every few years depending on exposure.

OSMO UV-Oil is a clear finish
OSMO UV-Oil is a clear finish

Our experiment

Last year we had an extension clad in Cedar. We knew from the get-go that we wanted the ‘new look’ of the Cedar in the long term. So, as the Cedar cladding was fitted, the OSMO oil was applied.

From one length of cladding we cut three boards. We kept one in our shed, unexposed to light as our ‘control’. We then took two offcuts of the Cedar and applied two coats of the OSMO UV-oil to one end. For a clean line between the natural finish and the oiled finish, we used masking tape.

One end of the boards was protected with OSMO UV-oil the other half left natural

In these images taken in August 2018, you can see that the oil enriches the wood, giving it a soft sheen. It also helps repel water which as we can see on the untreated end otherwise absorbs into the wood.

The UV-oil give the Cedar a soft sheen & repels water

Positioned on a south facing wall

We propped our tester up against a shed in a South facing position. So, it is getting full exposure to the sun. Different orientations will have a different rate of exposure. We often hear from buyers, that the front wall has changed colour quicker than the side walls; this is because of the differences in exposure.

Cedar sits by our shed on a South facing wall
Photo taken January 2019

We decided we would take a photo of the cladding on or around the 5th of each month to see how quickly the untreated section might change colour.

Before we look at the images

Okay, we should say when looking at the images, that the poor natural light in November and wet weather are affecting the colour difference.

There is, however, no doubt that the unprotected Cedar started to lose its richness quite quickly. The is definitely a change between the new wood of August 2018 and the most recent image in March 2019.

August 2018

September 2018

October 2018

November 2018

December 2018

January 2019

February 2019

March 2019

The colour differences in March 2019

There is a clear difference between the UV-oil protected Cedar and the unprotected section. This is in just a few months. So, if you want to maintain the original colour, ask your garden room supplier about applying a UV protector as they install your building.

https://www.thegardenroomguide.co.uk/watching-cedar-cladding-age/2019/03/21/
#cedar #cladding #gardenroomguide